TP-Link TL-SL5428E - show spanning-tree interface; show spanning-tree interface-security

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
212
Gzcorng"
Display the bridge parameters:"
VN/UN764:G*eqphki+%ujqy"urcppkpi/vtgg"dtkfig"
ujqy"urcppkpi/vtgg"kpvgthceg"
Fguetkrvkqp"
The ujqy" urcppkpi/vtgg" kpvgthceg command is used to display the
spanning-tree information of all ports or a specified port.
U{pvcz"
ujqy" urcppkpi/vtgg kpvgthceg [ hcuvGvjgtpgv port | ikicdkvGvjgtpgv port ]"
[edge | ext-cost | int-cost | mode | p2p | priority | role | state | status]
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the spanning-tree information of all ports:"
VN/UN764:G*eqphki+%ujqy"urcppkpi/vtgg kpvgthceg"
Display the spanning-tree information of Gigabit Ethernet port 25:"
VN/UN764:G*eqphki+%ujqy"urcppkpi/vtgg kpvgthceg"ikicdkvGvjgtpgv"1/0/25"
Display the spanning-tree mode information of Gigabit Ethernet port 25:"
VN/UN764:G*eqphki+%ujqy " urcppkpi/vtgg kpvgthceg" ikicdkvGvjgtpgv" 1/0/25
oqfg"
ujqy"urcppkpi/vtgg"kpvgthceg/ugewtkv{"
Fguetkrvkqp"
The ujqy"urcppkpi/vtgg"kpvgthceg/ugewtkv{ command is used to display the
protect information of all ports or a specified port.
U{pvcz"
ujqy"urcppkpi/vtgg"kpvgthceg/ugewtkv{"[ hcuvGvjgtpgv port |"ikicdkvGvjgtpgv"
port ]"[ bpdufilter | bpduguard | loop | root | tc | tc-defend ]