TP-Link TL-SL5428E - Chapter 33 IGMP Snooping Commands; ip igmp snooping(global); ip igmp snooping(interface)

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
232
Ejcrvgt"55" KIOR"Upqqrkpi"Eqoocpfu"
IGMP Snooping (Internet Group Management Protocol Snooping) is a multicast control
mechanism running on Layer 2 switch. It can effectively prevent multicast groups being
broadcasted in the network.
kr"kior"upqqrkpi*inqdcn+"
Fguetkrvkqp"
The kr kior"upqqrkpi"command is used to configure IGMP Snooping globally.
To disable the IGMP Snooping function, please use pq" kr" kior" upqqrkpi
command.
U{pvcz"
kr"kior"upqqrkpi
pq"kr"kior"upqqrkpi"
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Enable IGMP Snooping function:
VN/UN764:G*eqphki+%kr"kior"upqqrkpi"
kr"kior"upqqrkpi*kpvgthceg+"
Fguetkrvkqp"
The kr kior" upqqrkpi" command is used to enable the IGMP Snooping
function for the desired port. To disable the IGMP Snooping function, please use
pq"kr"kior"upqqrkpi command.
U{pvcz"
kr"kior"upqqrkpi
pq"kr"kior"upqqrkpi"
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)