TP-Link TL-SL5428E - show interface configuration; show storm-control

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
162
ujqy"kpvgthceg"eqphkiwtcvkqp
Fguetkrvkqp"
The ujqy" kpvgthceg" eqphkiwtcvkqp" command is used to display the
configurations of an Ethernet port, including Port-status, Flow Control,
Negotiation Mode and Port-description.
U{pvcz"
ujqy"kpvgthceg [ hcuvGvjgtpgv port"| ikicdkvGvjgtpgv port ] eqphkiwtcvkqp
Rctcogvgt
port —— The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the configurations of all Ethernet ports:
VN/UN764:G*eqphki+%ujqy"kpvgthceg"eqphkiwtcvkqp
ujqy"uvqto/eqpvtqn"
Fguetkrvkqp"
The ujqy" uvqto/eqpvtqn command is used to display the storm-control
information of an Ethernet port.
U{pvcz"
ujqy" uvqto/eqpvtqn [ kpvgthceg { hcuvGvjgtpgv port | ikicdkvGvjgtpgv port |
tcpig"hcuvGvjgtpgv port-list | tcpig"ikicdkvGvjg tpgv port-list } ]"
Rctcogvgt
port —— The Fast/Gigabit Ethernet port number.
port-list
—— The list of Fast/Gigabit Ethernet ports.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the storm-control information of port Gigabit Ethernet port 25:
VN/UN764:G*eqphki+%ujqy"uvqto/eqpvtqn"kpvgthceg"ikicdkvGvjgtpgv"1/0/25"
Display the storm-control information of port Fast Ethernet ports 4,5,6,7: