TP-Link TL-SL5428E - ipv6 mld snooping member-aging-time; ipv6 mld snooping report-suppression

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
249
Gzcorng"
Specify MLD Snooping router port aging time as 100 seconds globally:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"tqwvgt/cikpi/vkog 100"
krx8"onf"upqqrkpi"ogodgt/cikpi/vkog"
Fguetkrvkqp"
The krx8" onf" upqqrkpi" ogodgt/cikpi/vkog command is used to specify
member port aging time globally. The default aging time is 260 seconds. To
restore the default timer, please use pq" krx8" onf" upqqrkpi"
ogodgt/cikpi/vkog command.
U{pvcz"
krx8"onf"upqqrkpi"ogodgt/cikpi/vkog"timer
pq krx8"onf"upqqrkpi"ogodgt/cikpi/vkog
Rctcogvgt"
timer —— Specify the aging time in seconds, ranging from 200 to 1000.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify MLD Snooping member port aging time as 100 seconds globally:
VN/UN764:G*eqphki+%"krx8"onf"upqqrkpi"ogodgt/cikpi/vkog 100"
krx8"onf"upqqrkpi"tgrqtv/uwrrtguukqp"
Fguetkrvkqp"
The krx8"onf"upqqrkpi"tgrqtv/uwrrtguukqp command is used to enable the
Report message suppression function. By default, it is enabled. To disable this
function, please use pq"krx8"onf"upqqrkpi"tgrqtv/uwrrtguukqp command.
U{pvcz"
krx8"onf"upqqrkpi"tgrqtv/uwrrtguukqp
pq krx8"onf"upqqrkpi"tgrqtv/uwrrtguukqp
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Disable Report message suppression function: