TP-Link TL-SL5428E - show running-config; show cable-diagnostics interface

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
144
U{pvcz"
ujqy"u{uvgo/kphq
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the system information:
VN/UN764:G%ujqy u{uvgo/kphq"
ujqy"twppkpi/eqphki"
Fguetkrvkqp"
The ujqy" twppkpi/eqphki" command is used to display the current operating
configuration of the system or of a specified port.
U{pvcz"
ujqy"twppkpi/eqphki"[ kpvgthceg"{ hcuvGvjgtpgv"port ~"ikicdkvGvjgtpgv"port } ]
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the system current operating configuration:
VN/UN764:G%ujqy twppkpi/eqphki"
ujqy"ecdng/fkcipquvkeu"kpvgthceg"
Fguetkrvkqp"
The ujqy"ecdng/fkcipquvkeu"kpvgthceg command is used to display the cable
diagnostics of the connected Ethernet Port., which facilitates you to check the
connection status of the cable connected to the Switch, locate and diagnose the
trouble spot of the network.
U{pvcz"
ujqy"ecdng/fkcipquvkeu"kpvgthceg { hcuvGvjgtpgv port | ikicdkvGvjgtpgv port }