TP-Link TL-SL5428E - show dldp; show dldp interface

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
230
Gzcorng"
Reset the DLDP function of ports 2-4:
VN/UN764:G"*eqphki+%"kpvgthceg"tcpig"hcuvGvjgtpgv"1/0/2-4"
VN/UN764:G"*eqphki/kh/tcpig+%"fnfr"tgugv"
ujqy"fnfr"
Fguetkrvkqp"
The ujqy"fnfr command is used to display the global configuration of DLDP
function such as DLDP global state, DLDP interval and shut mode.
U{pvcz"
ujqy"fnfr"
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode
Gzcorng"
Display the global configuration of DLDP function:
VN/UN764:G%"ujqy"fnfr"
ujqy"fnfr"kpvgthceg"
Fguetkrvkqp"
The ujqy" fnfr" kpvgthceg command is used to display the configuration and
state of the specified Ethernet port. By default, the configuration and state of all
the ports will be displayed.
U{pvcz"
ujqy"fnfr"kpvgthceg"[ hcuvGvjgtpgv port | ikicdkvGvjgtpgv"port ]
Rctcogvgt"
port —— The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Privileged EXEC Mode and Any Configuration Mode