VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
221
VN/UN764:G*eqphki/kh+%" gvjgtpgv/qco" tgoqvg/hcknwtg" dying-gasp"pqvkh{"
disable
gvjgtpgv/qco" tgoqvg/nqqrdcem" tgegkxgf/tgoqvg/"
nqqrdcem"
Fguetkrvkqp"
The gvjgtpgv/qco"tgoqvg/nqqrdcem"tgegkxgf/tgoqvg/nqqrdcem command is
used to configure the client to process or to ignore the received remote
loopback request. To return to the default configurations, please use pq"
gvjgtpgv/qco"tgoqvg/nqqrdcem"tgegkxgf/tgoqvg/nqqrdcem command.
U{pvcz"
gvjgtpgv-qco" tgoqvg/nqqrdcem" tgegkxgf/tgoqvg/nqqrdcem" {" process |
ignore }
pq"gvjgtpgv/qco"tgoqvg/nqqrdcem" " tgegkxgf/tgoqvg/nqqrdcem"
Rctcogvgt"
process —— Process the received remote loopback request.
ignore —— Ignore the received remote loopback request.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Configure the client to process the received remote loopback request on Fast
Ethernet port 1:
VN/UN764:G*eqphki+%"kpvgthceg"hcuvGvjgtpgv"1/0/1"
VN/UN764:G*eqphki/kh+%" gvjgtpgv/qco" tgoqvg/nqqrdcem" tgegkxgf"
/tgoqvg/nqqrdcem"process
To Next Page
Loading...
