TP-Link TL-SL5428E - reboot; copy running-config startup-config

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
137
Gzcorng"
Reset the software of the switch:
VN/UN764:G%tgugv"
tgdqqv"
Fguetkrvkqp"
The tgdqqv" command is used to reboot the Switch. To avoid damage, please
don’t turn off the device while rebooting.
U{pvcz"
tgdqqv"
Eqoocpf"Oqfg"
Privileged EXEC Mode
Gzcorng"
Reboot the switch:
VN/UN764:G%tgdqqv"
eqr{"twppkpi/eqphki"uvctvwr/eqphki"
Fguetkrvkqp"
The eqr{"twppkpi/eqphki"uvctvwr/eqphki"command is used to save the current
settings.
U{pvcz"
eqr{"twppkpi/eqphki"uvctvwr/eqphki
Eqoocpf"Oqfg"
Privileged EXEC Mode
Gzcorng"
Save current settings:
VN/UN764:G%eqr{"twppkpi/eqphki"uvctvwr/eqphki"