TP-Link TL-SL5428E - access-list bind(interface)

VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
194
squ/tgoctm"fuer dscp rtkqtkv{ pri
pq"squ/tgoctm
Rctcogvgt"
dscp —— DSCP of QoS Remark. Specify the DSCP region for the data
packets matching the corresponding ACL. DSCP ranges from 0 to 63. By default,
it is not limited.
pri —— Local Priority of QoS Remark. Specify the local priority for the data
packets matching the corresponding ACL. Local Priority ranges from 0 to 3.
Eqoocpf"Oqfg"
Action Configuration Mode
Gzcorng"
Edit the actions for policy1. For the data packets matching ACL 120, specify the
DSCP region as 30 and local priority 2:
VN/UN764:G*eqphki+%ceeguu/nkuv"rqnke{"cevkqp"policy1 120"
VN/UN764:G*eqphki/cevkqp+%"squ/tgoctm"fuer"30"rtkqtkv{"2"
ceeguu/nkuv"dkpf*kpvgthceg+"
Fguetkrvkqp"
The ceeguu/nkuv"dkpf command is used to bind a policy to a specified port. To
cancel the bind relation, please use pq"ceeguu/nkuv"dkpf command.
U{pvcz"
ceeguu/nkuv"dkpf"policy-name
pq"ceeguu/nkuv"dkpf policy-name
Rctcogvgt"
policy-name —— The name of the policy desired to bind.
Eqoocpf"Oqfg"
Interface Configuration Mode (interface fastEthernet / interface range
fastEthernet / interface gigabitEthernet / interface range gigabitEthernet)
Gzcorng"
Bind policy1 to Fast Ethernet port 2:
VN/UN764:G*eqphki+%kpvgthceg"hcuvGvjgtpgv"1/0/2"
VN/UN764:G*eqphki/kh+%ceeguu/nkuv"dkpf policy1 "