VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
8
4. Type gpcdng command to enter Privileged EXEC Mode.
Figure 1-6 Enter into the Priviledged EXEC Mode
Now you can manage your switch with CLI commands through Telnet connection.
Nqikp"Oqfg"
Firstly configure the Telnet login mode as “nqikp” and the connection password as 678 in the
prompted DOS screen shown in Figure 1-7.
Figure 1-7 Configure login mode
Now, you can logon by Telnet in nqikp"oqfg:
1. Make sure the switch and the PC are in the same LAN. Click Uvctv and type in eof in the
Search programs and files window and press the Gpvgt button.
To Next Page
Loading...
