VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
7
Now, you can logon by Telnet in nqikp"nqecn"mode.
1. Make sure the switch and the PC are in the same LAN. Click Uvctv and type in eof in the
Search programs and files window and press the Gpvgt button.
Figure 1-3 Run Window
2. Type"vgnpgv"3;4038:0203"in the command prompt"shown as Figure 1-4, and press the Gpvgt
button.
Figure 1-4 Connecting to the Switch
3. Type the default user name and password (both of them are cfokp),"then press the"Gpvgt
button so as to enter User EXEC Mode.
Figure 1-5 Enter into the User EXEC Mode
To Next Page
Loading...
