VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
11
Rcuuyqtf"Cwvjgpvkecvkqp"Oqfg"
1. Open the software to log on to the interface of PuTTY. Enter the IP address of the switch into
Jquv"Pcog field; keep the default value 22 in the Rqtv field; select UUJ as the Connection
type.
Figure 1-13 SSH Connection Config
2. Click the Qrgp button in the above figure to log on to the switch. Enter the login user name
and password to log on the switch, and then enter enable to enter Privileged EXEC Mode, so
you can continue to configure the switch.
Figure 1-14 Log on the Switch
To Next Page
Loading...
