VN/UN764:G LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
16
Interface gigabitEthernet, Interface link-aggregation and some other modes, which is shown as the
following diagram.
The following table gives detailed information about the Accessing path, Prompt of each mode and
how to exit the current mode and access the next mode.
Oqfg" Ceeguukpi"Rcvj" Rtqorv" Nqiqwv"qt"Ceeguu"vjg"pgzv"oqfg
User EXEC
Mode
Primary mode once it is
connected with the
switch.
VN/UN764:G@"
Use the gzkv"command to disconnect the
switch (except that the switch is
connected through the Console port).
Use the"gpcdng"command to access
Privileged EXEC mode.
Privileged
EXEC Mode
Use the gpcdng"
command to enter this
mode from User EXEC
mode.
VN/UN764:G"%
Enter the fkucdng or the gzkv command to
return to User EXEC mode.
Enter eqphkiwtg command to access
Global Configuration mode.
Global
Configuration
Mode
Use the eqphkiwtg"
command to enter this
mode from Privileged
EXEC mode.
VN/UN764:G*eqphki+%
Use the gzkv"or the gpf command or
press Evtn-\ to return to Privileged
EXEC mode.
Use the kpvgthceg hcuvGvjgtpgv/
ikicdkvGvjgtpgv"port or kpvgthceg tcpig"
hcuvGvjgtpgv/ikicdkvGvjgtpgv"port-list
command to access interface
Configuration mode.
Use the xncp"vlan-list to access VLAN
Configuration mode.
To Next Page
Loading...
