EasyManuals Logo

Xerox WorkCentre 6605 Service Manual

Xerox WorkCentre 6605
662 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #351 background imageLoading...
Page #351 background image
Image Quality
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
3-25
Images are skewed
Possible causative parts
• Transfer Roller (PL14.1.99)
• Fuser Assembly (PL7.1.1)
• Transfer Belt Assembly (PL6.1.1)
• Retard Holder Assembly (PL13.3.14)
• Feed Roller Assembly (PL13.2.10)
• Retard Holder Assembly (PL10.3.3)
• TA1 Roller Assembly (PL13.1.2)
• TA2 Roller Assembly (PL13.1.3)
• Regi Chute Assembly (PL15.2.1)
• Exit Roller Assembly (PL17.1.14)
Action Yes No
1 Adjust the paper guides properly.
Does this solve your problem?
The task is
complete.
Go to action 2.
2 Install the Transfer Belt Assembly according to an appropriate
procedure.
Does this solve your problem?
The task is
complete.
Go to action 3.
3 Check the paper humidity conditioning effect.
Load the unopened (or stored and sealed under humidity control)
and recommended paper, and then perform a test print.
Is the image printed correctly?
The task is
complete.
Go to action 4.
4 Check the paper type setting.
Is the paper type setting corresponding with the paper printed?
Go to action 5. Set the correct
paper type.
5 Check the paper transfer path.
Are there any dirt or foreign substances on the paper transfer path
between the paper entrance and the paper exit?
Remove the
foreign
substance.
Go to action 6.
6 Check the paper feed path roller.
Is the roller on the paper feed path not dirty, damaged, or worn,
and does it work correctly?
Also, is the roller installed correctly?
Go to action 7. Clean or
replace the
corresponding
roller, and
reinstall it.
7 Check the installation status of the Transfer Roller.
Is Transfer Roller installed correctly?
Go to action 8. Reinstall
Transfer Roller.
8 Check the installation status of the Fuser Assembly.
Is the Fuser Assembly installed correctly?
Contact Xerox
Te ch ni ca l
Support.
Reinstall the
Fuser Assembly.
Skew 2

Table of Contents

Other manuals for Xerox WorkCentre 6605

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox WorkCentre 6605 and is the answer not in the manual?

Xerox WorkCentre 6605 Specifications

General IconGeneral
FunctionsPrint, Copy, Scan, Fax
Print TechnologyLaser
Print ResolutionUp to 600 x 600 x 4 dpi
Copy ResolutionUp to 600 x 600 dpi
Scan ResolutionUp to 600 x 600 dpi
Fax Speed33.6 Kbps
Standard Paper Capacity550 sheets
Maximum Paper Capacity1, 250 sheets
Paper Output250 sheets
Duplex PrintingYes
Processor533 MHz
Memory (Standard)512 MB
Memory (Maximum)1 GB
Monthly Duty CycleUp to 80, 000 pages
TypeMultifunction
Copy SpeedUp to 36 cpm black and color
Fax Resolution300 x 300 dpi
Media SizesLetter, Legal, A4, A5, B5, Custom sizes
ConnectivityUSB 2.0, Ethernet
Mobile PrintingApple AirPrint
Operating System CompatibilityWindows, Mac, Linux
Dimensions (W x D x H)500 mm
Weight29.6 kg
Print SpeedUp to 36 ppm (Black) / Up to 36 ppm (Color)

Related product manuals