Xerox WorkCentre 6605

Maintenance
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
6-11
Cleaning the Color Toner Density Sensors
1. Turn off the printer.
CAUTION: If the optional Productivity Kit (HD) is not installed, ensure that the Ready LED is off
before you turn off the printer. The data in the memory is cleared when the printer is turned off.
2. Push down on the rear door release and pull open the door.
3. Open the side door.
4. To unlock the waste cartridge, turn the waste cartridge lever 90-degrees counterclockwise.
2
1