Xerox WorkCentre 6605

General Information
Xerox Internal Use Only Phaser 6600 and WorkCentre 6605
Service Manual
1-81
Mutual Communication Ability
Characteristic Specification
Communication Mode Priority 1: ITU-T Super G3
Priority 2: ITU-T G3 ECM
Priority 3: ITU-T G3
Note: ITU: International Telecommunication Union
ITU-T: ITU Telecommunication Standardization Sector
ECM: Error Correction Mode
Modem Signal Processing The following communication standards are supported:
• V.34 (33.6 /31.2 /28.8 /26.4 /24 /21.6 /19.2 /16.8 /14.4 /12 /9.6 /7.2
/4.8 /2.4kbps)
• V.17 (14.4 /12 /9.6 /7.2kbps)
• V.29 (9.6 /7.2kbps)
• V.27ter (4.8 /2.4kbps)
Pixel Transmission Density (on the
supported transmission path)
B/W:
• R16 x 15.4 line/mm
•R8 x 15.4 line/mm
• R8 x 7.7 line/mm
• R8 x 3.85 line/mm
• 400 x 400 pixel/25.4mm
• 300 x 300 pixel/25.4mm
• 200 x 200 pixel/25.4mm,
• 200 x 100 pixel/25.4mm
Color: Not supported.
Communication Image Size Fast scan direction size on communication: 215 mm +/- 1%
Halftone/Compression Method B/W: 1bit, JBIG, MMR, MR, MH encoding
Color: Not supported.
Communication Control Procedure Comply with ITU-T recommendation T.30.
Nonstandard Function Not supported.