Azbil C7G - Page 22

1-4
Chapter 1. Overview

Model C7G (Not UL-compliant) Example: C7GA411CC0D00
Main unit I/O Other
DescriptionBase model No.
Comm. Size
Slots
A3,
A4
Slots
B3,
B4
Slots
A1,
A2
Slots
B1,
B2
Option
Add'l
proc.
Add'l
spec.
Special
support
1 2 3 4 5 6 7 8 9 10 11 12 13
C 7 G Multi-loop controller with multifunction display
A Communication (Ethernet, RS-485, USB)
7 digital input/outputs (sink output, source input)
3 Integrated mounting*
1
4 Standard (separate) mounting
Slot A3 Slot A4
1 PV1 (full-multi) × 1 (No block) AI
2 PV1 (full-multi) + RSP1 (full-multi)*
2
AI AI
A PV1 (full-multi) + 4 digital inputs (external
power source required)
DI AI
Slot B3 Slot B4
0 None (No block) (No block)
1 PV2 (full-multi) × 1 (No block) AI
Selectable if the 6th digit of the
model number (slots A3, A4) = 2 ..→
2 PV2 (full-multi) + RSP2 (full-multi)*
3
AI AI
Selectable if the 6th digit of the model
number (slots A3, A4) = 2 or A .......→
A PV1 (full-multi) + 4 digital inputs (external
power source required)
DI AI
Selectable if the 9th digit of the
model number (slots B1, B2) = 0, C, V,
F, W, N, G, H, 1, or 2 .................→
B PV1 (full-multi) + clock (with battery) CLOCK AI
Slot A1 Slot A2
C Current output (CT and VT inputs, 1 each) × 1 (No block) AO-C
V Voltage pulse output (2 CT inputs) × 1 (No block) V-P
F Current output (CT and VT inputs, 1 each) × 2 AO-C AO-C
W Voltage pulse output (2 CT inputs) × 2 V-P V-P
N Current output (CT and VT inputs, 1 each) +
voltage pulse output (2 CT inputs)
V-P AO-C
1 Current output (CT and VT inputs, 1 each) + 4
digital outputs (sink output)
DO AO-C
2 Voltage pulse output (2 CT inputs) × 4 digital
outputs (sink output)
DO V-P
Slot B1 Slot B2
Selectable if the 8th digit of the model number
(slots A1, A2) = C, V, F, 1, or 2 .....................→
0 None (No block) (No block)
Selectable if the 8th digit of the model number
(slots A1, A2) = C, F, N, or 1 .......................→
C Current output (CT and VT inputs, 1 each) × 1 (No block) AO-C
Selectable if the 8th digit of the model number
(slots A1, A2) = C, V, W, N, 1, or 2 .................→
V Voltage pulse output (2 CT inputs) × 1 (No block) V-P
Selectable if the 8th digit of the model number
(slots A1, A2) = F .................................→
F Current output (CT and VT inputs, 1 each) × 2 AO-C AO-C
Selectable if the 8th digit of the model number
(slots A1, A2) = W or N ...........................→
W Voltage pulse output (2 CT inputs) × 2 V-P V-P
Selectable if the 8th digit of the model number
(slots A1, A2) = F or N ............................→
N Current output (CT and VT inputs, 1 each) +
voltage pulse output (2 CT inputs)
V-P AO-C
Selectable if the 8th digit of the model number
(slots A1, A2) = C, F, N, or 1 .......................→
G Current output (CT and VT inputs, 1 each) +
additional display unit
HMI2 AO-C
Selectable if the 8th digit of the model number
(slots A1, A2) = C, V, W, N, 1, or 2 .................→
H Voltage pulse output (2 CT inputs) +
additional display unit
HMI2 V-P
Selectable if the 8th digit of the model number
(slots A1, A2) = C, F, N, or 1 .......................→
L Current output (CT and VT inputs, 1 each) +
clock (with battery)
CLOCK AO-C
Selectable if the 8th digit of the model number
(slots A1, A2) = C, V, W, N, 1, or 2 .................→
P Voltage pulse output (2 CT inputs) + clock
(with battery)
CLOCK V-P
Selectable if the 8th digit of the model number
(slots A1, A2) = F, N, or 1. . . . . . . . . . . . . . . . . . . . . . . . . . →
1 Current output (CT and VT inputs, 1 each) × 4
digital outputs (sink output)
DO AO-C
Selectable if the 8th digit of the model number
(slots A1, A2) = W, N, 1, or 2 ......................→
2 Voltage pulse output (2 CT inputs) × 4 digital
outputs (sink output)
DO V-P
0 None
0 None
D With inspection report
Y With traceability certificate
0 AC power plus CE, KC, and GB compliance
D DC power plus CE, KC, and GB compliance
0 No special support
F Overseas models: switchable between Celsius/Fahrenheit
Do not use these models in Japan.
*1. A rear mounting bracket and a dedicated cable for connecting the display unit are included with the product.
*2. RSP1 can be switched for use as PV3.
*3. RSP2 can be switched for use as PV4.