Azbil C7G User Manual

9-10
Chapter 9. User-defined Addresses
Monitor > Alarm Status > Loop 2 Alarm (bit field)
Bit15 = User-defined alarm
Bit14 to Bit4 = Empty (fixed to 0)
Bit3 = RSP high limit error
Bit2 = RSP low limit error
Bit1 = PV high limit error
Bit0 = PV low limit error
Monitor > Alarm Status > Loop 3 Alarm (bit field)
Bit15 = User-defined alarm
Bit14 to Bit4 = Empty (fixed to 0)
Bit3 = RSP high limit error
Bit2 = RSP low limit error
Bit1 = PV high limit error
Bit0 = PV low limit error
Monitor > Alarm Status > Loop 4 Alarm (bit field)
Bit15 = User-defined alarm
Bit14 to Bit4 = Empty (fixed to 0)
Bit3 = RSP high limit error
Bit2 = RSP low limit error
Bit1 = PV high limit error
Bit0 = PV low limit error

Azbil C7G Specifications

General

Brand	Azbil
Model	C7G
Category	Controller
Language	English