C Commands
collect routing
84
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
This example shows how to configure the forwarding status as a nonkey field and collects the forwarding
status value:
switch(config)# flow record FLOW-RECORD-1
switch(config-flow-record)# collect routing forwarding-status
Related Commands Command Description
collect counter Configures the counters as a nonkey field and collects the counter values.
collect flow Configures flow identifying fields as nonkey fields and collects their values.
collect interface Configures the input or output interface as a nonkey field and collects the
values.
collect ipv4 Configures an IPv4 field as a nonkey field and collects the value in it.
collect routing Configures a routing attribute as a nonkey field and collects the value of the
field.
collect timestamp Configures the times tamp fields as a nonkey field and collects the values.
collect transport Configures a transport layer field as a nonkey field and collects the values.
flow record Creates a flow record.
match flow Configures one or more of the flow fields as key fields.
match interface Configures the direction that traffic flows in respect to an interface (interface
field) as a key field.
match ipv4 Configures one or more of the IPv4 fields as key fields.
match routing Configures one or more of the routing fields as key fields.
match timestamp Configures a time stamp field as a key field.
match transport Configures one or more of the transport fields as key fields.
show flow record Displays the flow record status and statistics.
To Next Page
Loading...
