Cisco Nexus 7000 Series

Show Commands
show event manager policy-state
473
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show event manager policy-state
To display the state of the named Embedded Event Manager (EEM) policy, use the show event manager
policy-state command.
show event manager policy-state name [module module]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the state of an EEM policy:
switch# show event manager policy-state policy42
switch#
name Name of a policy to display its state.
module module (Optional) Displays the policy state defined for a specific module. The range is
from 1 to 10.
Release Modification
4.0(1) This command was introduced.