Cisco Nexus 7000 Series

S Commands
system hap-reset
408
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
system hap-reset
To enable the Supervisor Reset high availability (HA) policy, use the system hap-reset command.
system hap-reset
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to enable the Supervisor Reset HA policy:
switch(config)# system hap-reset
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show system standby
manual-boot
Displays the status of the system standby manual boot option.