Cisco Nexus 7000 Series

D Commands
destination-profile transport-method
119
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
destination-profile transport-method
To specify a method of transporting Call home messages to a destination, use the destination-profile
transport-method command. To remove the transport method, use the no form of this command.
destination-profile profile-name transport-method [email | http]
no destination-profile profile-name transport-method [email | http]
Syntax Description
Defaults None
Command Modes Call home configuration (config-callhome)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to specify HTTP for transporting Call home messages to a destination:
switch(config-callhome)# destination-profile acme_destination transport-method http
switch(config-callhome)#
Related Commands
profile-name Name you have given the Call home destination profile where the transport method
is to be specified.
transport-
method
Specifies the method (email or HTTP) for sending messages to the Call home
destination.
email (Optional) Specifies if using e-mail to send Call home messages to the Call home
destination.
http (Optional) Specifies if using HTTP to send Call home messages to the Call home
destination.
Release Modification
4.0(1) This command was introduced.
Command Description
show callhome
destination-profile
Displays a Call home destination profiles.
show callhome Displays the Call home configuration.