Cisco Nexus 7000 Series

xxiii
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
New and Changed Information
This chapter provides release-specific information for each new and changed feature in the Cisco Nexus
7000 Series NX-OS System Management Command Reference. The latest version of this document is
available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_0/nx-os/system_management/command/r
eference/sm_nx_os_book.html
To check for additional information about Cisco NX-OS Release 6.0, see the Cisco NX-OS Release Notes
available at the following Cisco website:
http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_0/nx-os/release/notes/6x_nx-os_release_n
ote.html
Table 1 summarizes the new and changed features for the Cisco Nexus 7000 Series NX-OS System
Management Command Reference, and tells you where they are documented.
Ta b l e 1 New and Changed Features for Release 6.x
Feature Description
Changed
in
Release
Where Documented
BloggerD This command was introduced. 6.2(2) bloggerd log-dump
This command was introduced. 6.2(2) bloggerd log-transfer
This command was introduced. 6.2(2) bloggerd parse log-buffer
Converting CLI
Commands to Network
Configuration Format
This command was introduced. 6.2(2) xmlin
NTP Added the match-all keyword to the ntp
access-group command.
6.2(2) ntp access-group
This command was introduced. 6.2(2) ntp broadcast
This command was introduced. 6.2(2) ntp broadcastdelay
This command was introduced. 6.2(2) ntp disable
This command was introduced. 6.2(2) ntp multicast
This command was introduced. 6.2(2) ntp multicast client
This command was introduced. 6.2(2) ntp passive
SPAN This command was introduced. 6.2(2) filter (ERSPAN)
This command was introduced. 6.2(2) filter (SPAN)