Cisco Nexus 7000 Series

C Commands
callhome test
35
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
callhome test
To send a test message to all configured Call home destinations, use the callhome test command.
callhome test {inventory}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to send a Call home test message:
switch(config)# callhome test
trying to send test callhome message
switch(config)#
Related Commands
inventory Sends a dummy callhome inventory to all configured Call home destinations.
Release Modification
4.0(1) This command was introduced.
Command Description
callhome Enters the Call home configuration mode.
callhome send Sends a configuration or diagnostic message to all configured Call home
destinations.
show callhome Displays the Call home configuration.