Cisco Nexus 7000 Series

Show Commands
show ntp internal
565
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp internal
To display the Network Time Protocol (NTP) internal information, use the show ntp internal command.
show ntp internal {event-history [config | fsm | msgs | rts | tstamp] | mem-stats [detail] |
module-info}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
event-history Specifies the event history.
config (Optional) Specifies the configuration history.
fsm (Optional) Specifies the finite state machine (FSM) state transition.
msgs (Optional) Specifies the message and transaction service (MTS) message history.
rts (Optional) Specifies the request-to-send (RTS) history.
tstmp (Optional) Specifies the timestamp update history.
mem-stats Specifies memory allocation statistics of NTP.
detail (Optional) Specifies the memory allocation statistics of NTP in detail.
module-info Specifies all line card-related information.
Release Modification
4.0(1) This command was introduced.