Cisco Nexus 7000 Series

Show Commands
show lldp traffic interface ethernet
528
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show lldp traffic interface ethernet
To display the number of Link Layer Discovery Protocol (LLDP) packets sent and received on the
interface, use the show lldp traffic interface ethernet command.
show lldp traffic interface ethernet slot/port-number
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the number of LLDP packets sent and received on the interface:
switch(config)# show lldp traffic interface ethernet 7/1
LLDP interface traffic statistics:
Total frames transmitted: 0
Total entries aged: 0
Total frames received: 0
Total frames received in error: 0
Total frames discarded: 0
Total unrecognized TLVs: 0
switch(config)#
slot/port-number Slot number and port number in this format: slot/port-number. The range is from 1
to 253.
Release Modification
5.0(1) This command was introduced.