Cisco Nexus 7000 Series

Show Commands
show startup-config cfs
656
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show startup-config cfs
To display information about the Cisco Fabric Services (CFS) startup configuration, use the show
startup-config cfs command.
show startup-config cfs [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the CFS startup configuration:
switch(config)# show startup-config cfs
!Command: show startup-config cfs
!Time: Tue Feb 2 22:40:47 2010
!Startup config saved at: Thu Jan 21 08:39:42 2010
version 5.0(2)
switch(config)#
Related Commands
all (Optional) Displays all of the CFS startup configuration.
Release Modification
4.1(2) This command was introduced.
Command Description
cfs distribute Enables CFS distribution for the device globally.
show cfs status Displays the CFS distribution status.