Cisco Nexus 7000 Series

Show Commands
show ntp access-groups
562
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp access-groups
To display the Network Time Protocol (NTP) access group configuration, use the show ntp
access-groups command.
show ntp access-groups
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the NTP access group configuration:
switch(config)# show ntp access-groups
--------------------------------------
Access List Type
--------------------------------------
Admin_Group_123 Peer
switch(config)#
Related Commands
Release Modification
5.0(1) This command was introduced.
Command Description
ntp access-group peer Configures an NTP access group.