Cisco Nexus 7000 Series

S Commands
system no standby manual-boot
412
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
system no standby manual-boot
To disable the system standby manual boot option, use the system no standby manual-boot command.
system no standby manual-boot
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to disable the system standby manual boot option:
switch(config)# system no standby manual-boot
system standby manual-boot option disabled
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
show system standby
manual-boo
t
Displays the status of the system standby manual boot option.