Cisco Nexus 7000 Series

Show Commands
show flow record
487
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show flow record
To display the status and statistics of a Flexible NetFlow flow record, use the show flow record
command.
show flow record [name record-name | netflow ipv4 record | netflow-original]
Syntax Description
Defaults Information for all flow exporters configured on the router is displayed.
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow using an exporter before you
can use the show flow exporter command.
Table 5 describes the keywords and descriptions for the record argument.
This command does not require a license.
Examples This example shows how to display the status and statistics of the original input NetFlow record:
name record-name (Optional) Specifies the name of a flow record that you previously
configured.
netflow ipv4 record (Optional) Configures the flow monitor to use one of the predefined records.
See
Table 5 for a listing of the available records and their definitions.
netflow-original (Optional) Specifies the Flexible NetFlow implementation of original
NetFlow with origin autonomous systems.
Release Modification
4.0(1) This command was introduced.
Ta b l e 5 Keywords and Descriptions for the record Argument
original-input Traditional IPv4 input NetFlow.
original-output Traditional IPv4 output NetFlow.
protocol-port Protocol ports record.