Cisco Nexus 7000 Series

Show Commands
show startup-config cdp
653
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show startup-config cdp
To display the Cisco Discovery Protocol (CDP) startup configuration, use the show startup-config cdp
command.
show startup-config cdp [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the CDP startup configuration with defaults:
switch(config)# show startup-config cdp all
!Command: show startup-config cdp
!Time: Tue Feb 2 22:36:26 2010
version 5.0(2)
logging level cdp 6
switch(config)#
all (Optional) Displays the startup configuration with defaults.
Release Modification
4.1(2) This command was introduced.