Cisco Nexus 7000 Series

Show Commands
show startup-config snmp
663
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show startup-config snmp
To display the startup Simple Network Management Protocol (SNMP) configuration of a system, use the
show startup-config snmp command.
show startup-config snmp [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
all (Optional) Displays the startup SNMP configuration with defaults.
Release Modification
4.1(2) This command was introduced.