Cisco Nexus 7000 Series

Show Commands
show processes
587
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show processes
To display the process information for a device, use the show processes command.
show processes [vdc vdc-number]
Syntax Description
Defaults Displays information for all processes in the local device.
Command Modes Any command mode
Supported User Roles network-admin
vdc-admin
network-operator
vdc-operator
Command History
Usage Guidelines You can specify another VDC only from the default VDC.
This command does not require a license.
Examples This example shows how to display the process information for a device:
switch# show processes
PID State PC Start_cnt TTY Type Process
----- ----- -------- ----------- ---- ---- -------------
1 S b7f9e468 1 - O init
2 S 0 1 - O migration/0
3 S 0 1 - O ksoftirqd/0
4 S 0 1 - O desched/0
5 S 0 1 - O migration/1
6 S 0 1 - O ksoftirqd/1
7 S 0 1 - O desched/1
8 S 0 1 - O events/0
9 S 0 1 - O events/1
10 S 0 1 - O khelper
15 S 0 1 - O kthread
...
vdc vdc-number (Optional) Displays process information for a specific virtual device context
(VDC).
Release Modification
4.0(1) This command was introduced.