Cisco Nexus 7000 Series

E Commands
event manager run
155
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
event manager run
To manually run a registered Embedded Event Manager (EEM) policy, use the event manager run
command.
event manager run policy-name
Syntax Description
Defaults None
Command Modes Embedded event manager
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to manually run a registered EEM policy:
switch# configure terminal
switch(config)# event manager run fanpolicy.vsh
switch(config)#
policy-name Name of the registered EEM policy to run.
Note System policy names begin with two underscore characters (__).
Release Modification
4.0(1) This command was introduced.