Cisco Nexus 7000 Series

Show Commands
show locator-led status
530
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show locator-led status
To show the status of locator LEDs on the system, use the show locator-led status command.
show locator-led status
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows the locator LED status for the system:
switch# show locator-led status
Xbar 1 : Locator LED off
Module 7 : Locator LED off
Module 9 : Locator LED off
Module 12 is not powered up.
Chassis Locator LED off
PowerSupply 1 : Locator LED off
PowerSupply 2 : Locator LED off
Fan 1 : Locator LED off
Fan 2 : Locator LED off
switch(config)#
Related Commands
Release Modification
4.1(2) This command was introduced.
Command Description
locator-led Blinks an LED on the system.