Cisco Nexus 7000 Series

Show Commands
show lldp tlv-select
526
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show lldp tlv-select
To display the type, length, and value (TLV) configuration for the Link Layer Discovery Protocol
(LLDP), use the show lldp tlv-select command.
show lldp tlv-select
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the TLV configuration for LLDP:
switch(config)# show lldp tlv-select
access-management
dcbx
port-description
port-vlan
system-capabilities
system-description
system-name
switch(config)#
Related Commands
Release Modification
5.0(1) This command was introduced.
Command Description
show lldp dcbx
interface ethernet
Displays the local DCBX control status.
lldp tlv-select Specifies the TLVs to send and receive in LLDP packets.