Cisco Nexus 7000 Series

N Commands
ntp enable
298
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
ntp enable
To enable Network Time Protocol (NTP), use the ntp enable command. To disable NTP, use the no
command form.
ntp enable
no ntp enable
Syntax Description This command has no arguments or keywords.
Defaults Enabled
Command Modes Global configuration mode
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines NTP must be configured in the default VDC. It cannot be configured in any other VDC.
This command does not require a license.
Examples This example shows how to disable NTP:
switch# no ntp enable
Related Commands
Release Modification
5.2(1) This command was deprecated.
4.0(3) This command was introduced.
Command Description
ntp server Configures a remote NTP server.