Cisco Nexus 7000 Series

S Commands
system watchdog
423
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
system watchdog
To enable watchdog checks, use the system watchdog command.
system watchdog
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to enable watchdog checks:
switch(config)# system watchdog
switch(config)#
Related Commands
Release Modification
4.0(1) This command was introduced.
Command Description
system no watchdog Disables the watchdog feature.
system no watchdog
kgdb
Prevents the system from entering the Linux KGDB debugger on a
watchdog failure.