Cisco Nexus 7000 Series

Show Commands
show startup-config diagnostic
655
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show startup-config diagnostic
To display startup-configuration diagnostics, use the show startup-config diagnostic command.
show startup-config diagnostic [all]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the startup-configuration diagnostics:
switch(config)# show startup-config diagnostic all
!Command: show startup-config diagnostic all
!Time: Tue Jan 26 22:38:22 2010
!Startup config saved at: Thu Jan 21 08:39:42 2010
version 5.0(2)
diagnostic bootup level complete
switch(config)#
Related Commands
all (Optional) Displays the startup configuration with defaults.
Release Modification
4.0(1) This command was introduced.
Command Description
show running-config
diagnostic
Displays the running-configuration diagnostics.