Cisco Nexus 7000 Series

Show Commands
show event manager environment
469
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show event manager environment
To display the name and value of Embedded Event Manager (EEM) environment variables, use the show
event manager environment command.
show event manager environment {varname | all}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display all of the EEM environment variables:
switch# show event manager environment all
switch#
varname Environment variable.
all Specifies all environment variables
Release Modification
4.0(1) This command was introduced.