Cisco Nexus 7000 Series

Show Commands
show tech-support cfs
682
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show tech-support cfs
To display information about the Cisco Fabric Services (CFS) configuration required by technical support,
use the show tech-support cfs command.
show tech-support cfs {commands | [name application_name {commands}]}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display information about the CFS configuration required by technical
support:
switch# show tech-support cfs
`show cfs application`
----------------------------------------------
Application Enabled Scope
----------------------------------------------
ntp No Physical-fc-ip
stp Yes Physical-eth
vpc Yes Physical-eth
igmp Yes Physical-eth
l2fm Yes Physical-eth
role No Physical-fc-ip
radius No Physical-fc-ip
callhome Yes Physical-fc-ip
commands Displays all related CFS commands for use when working with technical support
on a CFS issue.
name
application_name
(Optional) Displays information about the CFS configuration required by technical
support for a specific application.
Release Modification
4.1(2) This command was introduced.