Cisco Nexus 7000 Series

P Commands
port-monitor name
324
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
port-monitor name
To create a Simple Network Management Protocol (SNMP) port-monitor policy, use the port-monitor
name command. To delete a port-monitor policy, use the no form of this command.
port-monitor name policy-name
no port-monitor name policy-name
Syntax Description
Defaults None
Command Modes Global configuration mode (config)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to create an SNMP port-monitor policy:
switch(config)# port-monitor name PM1
switch(config-port-monitor)#
This example shows how to remove an SNMP port-monitor policy:
switch(config)# no port-monitor name PM1
switch(config)
Related Commands
policy-name Policy name. The maximum number of alphanumeric characters is 32.
Release Modification
4.1(2) This command was introduced.
Command Description
port-monitor activate Activates the specified port-monitor policy.