Cisco Nexus 7000 Series

Show Commands
show cfs regions
441
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show cfs regions
To display all Cisco Fabric Services (CFS) applications with peers and region information, use the show
cfs regions command.
show cfs regions {name application_name | region region_id}
show cfs regions brief {name application_name | region region_id}
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display a brief version of all CFS regions:
switch# show cfs regions brief
---------------------------------------
Region Application Enabled
---------------------------------------
3 radius yes
4 callhome yes
This example shows how to display a specified CFS region:
switch# show cfs regions region 4
name
application_name
(Optional) Displays peer and region information for a specified application.
region region_id Displays peer and region information for a specified region ID.
The range is from 1 to 200.
brief Displays configured regions and applications but does not display peers.
Release Modification
4.1(2) This command was introduced.