Cisco Nexus 7000 Series

Show Commands
show logging loopback
538
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show logging loopback
To display the logging loopback configuration, use the show logging loopback command.
show logging loopback
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the logging loopback configuration:
switch# show logging loopback
switch#
Release Modification
4.0(1) This command was introduced.