Cisco Nexus 7000 Series

Show Commands
show running-config eem
622
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show running-config eem
To display the Embedded Event Manager (EEM) running configuration, use the show running-config
eem command.
show running-config eem
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows the Embedded Event Manager (EEM) running configuration:
switch# show running-config eem
switch(config)# show running-config eem
!Command: show running-config eem
!Time: Fri Jan 15 22:23:28 2010
version 5.0(2)
switch(config)#
Release Modification
4.0(1) This command was introduced.