Cisco Nexus 7000 Series

D Commands
description (NetFlow sampler)
104
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
description (NetFlow sampler)
To add a description to a NetFlow sampler, use the description command. To remove the description,
use the no form of this command.
description line
no description [line]
Syntax Description
Defaults None
Command Modes NetFlow sampler configuration (config-flow-sampler)
Supported User Roles network-admin
vdc-admin
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to add a description to a NetFlow sampler:
switch(config)# sampler Netflow-Sampler-1
switch(config-flow-sampler)# description Custom-Sampler-1
switch(config-flow-sampler)#
This example shows how to remove the description:
switch(config-flow-sampler)# no description
Related Commands
line Description string. The string can have a maximum of 63 alphanumeric characters.
Release Modification
4.0(1) This command was introduced.
Command Description
show sampler Displays information about NetFlow samplers.