Cisco Nexus 7000 Series

D Commands
diagnostic ondemand iteration
127
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
diagnostic ondemand iteration
To configure the number of times that the on-demand test runs, use the diagnostic ondemand iteration
command.
diagnostic ondemand iteration number
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to configure the number of times that the on-demand test runs:
switch# diagnostic ondemand iteration 992
Related Commands
number (Optional) Number of times that the on-demand test runs. The range is from 1 to
999. The default is 1.
Release Modification
4.0(1) This command was introduced.
Command Description
show diagnostic
ondemand
Displays information about on-demand tests.