Cisco Nexus 7000 Series Reference Guide

Show Commands
show hardware flow aging
500
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show hardware flow aging
To display information about NetFlow hardware flow aging, use the show hardware flow aging
command.
show hardware flow aging [vdc vdc-name] [module slot-number]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines You must have already enabled traffic monitoring with Flexible NetFlow before you can use the
show
hardware flow aging command.
This command does not require a license.
Examples This example shows how to display the NetFlow aging values for module 2:
switch(config)# show hardware flow aging module 2
VDC(1) Aging Information (time unit is second):
AgingType Enabled Timeout Period Threshold
----------+----------+----------+----------+----------
Active Yes 1800 360 N/A
Inactive Yes 15 3 N/A
Fast Yes 33 6 22
Aggressive No 90 18 90
Session No 2 5 N/A
switch(config)#
vdc vdc-name (Optional) Specifies the virtual context device (VDC) name. The VDC name
can be any case-sensitive, alphanumeric string up to 64 characters.
module slot-number (Optional) Displays information specific to a module.
Release Modification
4.0(1) This command was introduced.

Cisco Nexus 7000 Series Specifications

General

Chassis	Modular
Operating System	Cisco NX-OS
Latency	Sub-microsecond
IPv6 Support	Yes
Redundancy	Power supplies, fans, supervisors, fabric modules
Power Supply	AC or DC
Layer Support	L2, L3
Network Management	CLI, SNMP
Virtualization	VRF, vPC
Ports	10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet, Fibre Channel, Fibre Channel over Ethernet (FCoE)
Supported Modules	Various (1G, 10G, 40G, 100G)
Features	FCoE, OTV, LISP
MPLS Support	Yes
Quality of Service (QoS)	Yes
Security Features	ACLs, Cisco TrustSec, Control Plane Policing (CoPP)
Dimensions	Varies by model
Weight	Varies by model
Operating Temperature	0 to 40°C (32 to 104°F)
Storage Temperature	-40°F to 158°F (-40°C to 70°C)
Humidity	5 to 95% noncondensing
MTBF	Varies by model
Number of Slots	Varies by model (9-slot, 10-slot, 18-slot)