Cisco Nexus 7000 Series

Show Commands
show cfs merge status
437
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show cfs merge status
To display the merge status for an application that uses Cisco Fabric Services (CFS) for distribution, use
the show cfs merge status command.
show cfs merge status [name application_name]
Syntax Description
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to display the current merge status for the Call Home application that uses CFS
for distribution. In this example, the most recent merge for the Call Home application was successful.
switch(config-callhome)# show cfs merge status name callhome
Physical-fc-ip Merge Status: Success [ Wed Dec 17 16:34:26 2008 ]
Local Fabric
--------------------------------------------------------------------------------
Switch WWN IP Address
--------------------------------------------------------------------------------
20:00:00:22:55:79:a4:c1 172.28.230.85 [Merge Master]
switch
Total number of switches = 10
name
application_name
(Optional) Displays the name of a specific application.
Release Modification
4.1(2) This command was introduced.