Cisco Nexus 7000 Series

Show Commands
show ntp rts-update
574
Cisco Nexus 7000 Series NX-OS System Management Command Reference
OL-25806-03
show ntp rts-update
To display if the request to send (RTS) update is enabled, use the show ntp rts-update command.
show ntp rts-update
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes Any command mode
Supported User Roles network-admin
network-operator
vdc-admin
vdc-operator
Command History
Usage Guidelines This command does not require a license.
Examples This example shows how to view RTS-update information:
switch(config)# show ntp rts-update
RTS update is enabled
switch(config)#
Related Commands
Release Modification
4.1(2) This command was introduced.
Command Description
show ntp source-inter-
face
Displays information about the NTP source.